-
COD ID BLACK UV — Reagent-Free Online COD Monitor | UV254 Probe $11,000.00
$11,000.00×
New
PEEK Right-Angle Compact Conductivity Sensor
✓ In StockAvailable to order — allow 2–3 weeks for delivery after order confirmation.
The InstroDirect IDC-R90-PEEK PEEK Right-Angle Compact Conductivity Sensor — is a specialty right-angle PEEK-body conductivity probe for installations where a straight in-line probe won’t fit — narrow pipe runs, instrument panel bosses, OEM analyser cabinets, and laboratory bench rigs. RS485 Modbus / Pt1000, 0 – 20 mS/cm, IP68. Backed by Australian technical support, on-site calibration, and next-day Brisbane dispatch.
- Estimated delivery time 3-30 days - some items in stock in Australia
- 12 months standard warranty
- Genuine manufacturer-made products
Product details
PEEK Right-Angle Compact Conductivity Sensor — Tight-Space Installation
The InstroDirect IDC-R90-PEEK PEEK Right-Angle Compact Conductivity Sensor is a specialty right-angle PEEK-body conductivity probe for installations where a straight in-line probe won’t fit — narrow pipe runs, instrument panel bosses, OEM analyser cabinets, and laboratory bench rigs. The right-angle body lets you measure in a horizontal line while the cable exits vertically, saving 80 mm of vertical clearance.
Technical Specifications
| Parameter | Specification |
|---|---|
| Measurement method | 2-electrode contacting |
| Conductivity range | 0 – 20 mS/cm |
| Cell constant (K) | K = 1.0 (cm⁻¹) |
| Accuracy | ±1.5% of reading |
| Temperature measurement | Integrated Pt1000 / Pt100 |
| Operating temperature | 0 – 100 °C |
| Pressure rating | ≤ 4 bar |
| Output signal | Analog mV output (Pt1000 integrated) or RS485 Modbus (specify) |
| Body / wetted materials | PEEK body, platinum electrodes, FKM O-rings, 1/4″ NPT stainless adapter |
| Process connection | 1/4″ NPT male threaded (right-angle orientation) |
| Ingress protection | IP68 |
| Cable | Flying leads, 1 m standard (5 m on request) |
| Warranty | 12 months, Australian-backed |
Typical Australian Applications
- OEM analyser and datalogger integration
- Laboratory bench measurement rigs
- Compact instrument panels with limited clearance
- Small-bore sample lines (<15 mm ID)
- Flow cells in portable water-quality instruments
Why Integrators Choose the IDC-R90-PEEK
- Right-angle body saves ~80 mm vertical clearance over a straight probe
- 1/4″ NPT thread fits small-bore sample fittings and laboratory setups
- PEEK tolerates laboratory chemistries that would attack plastics
- Short form factor suits hand-held and portable instruments
- Low cost — ideal for OEM volume integration
Installation & Calibration Notes
Screw into a 1/4″ NPT port using PTFE tape. Ensure electrodes are fully submerged. Flying leads can be wired directly to a terminal block or a custom connector for OEM applications. Quote available for volume OEM builds.
Frequently Asked Questions
Can I order this in volume for OEM integration?
Yes. Minimum order quantity 10 units for OEM discount pricing. Branding options (private label, custom wire colours, custom cable lengths) available on request.
Why right-angle?
Some instrument panels don’t have the vertical clearance for a straight 100–150 mm probe plus cable entry. The right-angle geometry lets the probe measure in a horizontal line with the cable exiting vertically (or vice versa).
Is a 4-electrode version available?
Not in this right-angle form factor. For 4-electrode service choose IDC-4E-POM or IDC-4E-SS.
Australian Technical Support, Calibration & Consumables
- Phone and email technical support from Brisbane-based field engineers with 20+ years automation experience
- On-site two-point conductivity calibration across QLD, NSW, VIC with certificate of calibration
- KCl calibration solutions (1413 µS/cm, 12.88 mS/cm, 111.8 mS/cm) stocked locally
- Replacement electrodes and O-rings for extended service life — dispatched same business day ex Brisbane
- Next-day delivery across Australia for stock items; trade pricing from 5 units
InstroDirect also stocks the full water-analysis reagent range for pH, dissolved oxygen, chlorine, ammonia, and nitrate monitoring.
Request a Trade Quote
Panel builders, system integrators, council water departments, food & beverage engineers, and pharma/process teams get volume trade pricing. Submit a quote request and we’ll respond within one business day with stock, pricing, and lead time.
Customers Reviews
Related products
New
New
New
New
New
New
There are no reviews yet.