Water Quality Monitoring
Industrial water-quality instrumentation — open protocol, Australian-supported
An open-protocol alternative to Endress+Hauser, HACH, KROHNE, and Mettler Toledo for Australian panel builders, water utilities, and process operators. Every digital sensor speaks RS485 Modbus RTU. No Memosens lock-in. No SC transmitter dependency.
Open Modbus RTUQLD-based engineers2–4 week delivery
Browse by parameter
15 SKUspH SensorsAnalog glass-bulb through HF-resistant and 13-bar alkali10 SKUsConductivity2 & 4-electrode, M12 digital, PEEK, sanitary tri-clamp3 SKUsControllers & TransmittersSingle-channel LCD to 8-channel touchscreen2 SKUsDissolved OxygenFluorescence optical, industrial + replaceable-cap2 SKUsTurbidity & Suspended SolidsISO 7027 inline, self-cleaning MLSS wiper1 SKUOnline AnalyzersNitrate ion-selective (NO3-N)
15 SKUspH SensorsAnalog glass-bulb through HF-resistant and 13-bar alkali10 SKUsConductivity2 & 4-electrode, M12 digital, PEEK, sanitary tri-clamp3 SKUsControllers & TransmittersSingle-channel LCD to 8-channel touchscreen2 SKUsDissolved OxygenFluorescence optical, industrial + replaceable-cap2 SKUsTurbidity & Suspended SolidsISO 7027 inline, self-cleaning MLSS wiper1 SKUOnline AnalyzersNitrate ion-selective (NO3-N)
Any PLCAllen-Bradley, Siemens, Schneider, or any Modbus RTU master. No proprietary head required.RS485Modbus RTU on every digital sensor. No vendor lock-in.20+ yrAU field engineer experience behind every support call2–4 wkDelivery from order confirmation. On-site commissioning available.
Featured products
IDO-F40iIndustrial Fluorescence Dissolved Oxygen Sensor0–20 mg/L · RS485View ›IDH-J605-HPHigh-Pressure Alkali pH Electrode13 bar · 130 °CView ›IDC-4E-SSStainless 4-Electrode Conductivity Sensor0–200 mS/cm · RS485View ›IDWQ-30004–8 Channel Touchscreen Controller5″ touch · ModbusView ›IDTB-SS-WSelf-Cleaning Turbidity / MLSS Probe0–4000 NTU · WiperView ›
IDO-F40iIndustrial Fluorescence Dissolved Oxygen Sensor0–20 mg/L · RS485View ›IDH-J605-HPHigh-Pressure Alkali pH Electrode13 bar · 130 °CView ›IDC-4E-SSStainless 4-Electrode Conductivity Sensor0–200 mS/cm · RS485View ›IDWQ-30004–8 Channel Touchscreen Controller5″ touch · ModbusView ›IDTB-SS-WSelf-Cleaning Turbidity / MLSS Probe0–4000 NTU · WiperView ›
Specifying a loop? Send us the chemistry, pressure, and temperature — we’ll match you to the right SKUs.Request a trade quote →
Why InstroDirect for water-quality instrumentation in Australia?
Australian panel builders, water utilities, wastewater treatment plants, aquaculture operators, food and beverage manufacturers, mining operations and environmental consultants choose InstroDirect when they need open-protocol, technically-supported water-quality instrumentation without the cost and lock-in of Tier 1 brands.
Every digital sensor in our range speaks RS485 Modbus RTU — the universal industrial protocol. No Endress+Hauser Memosens proprietary head. No HACH SC controller dependency. No Mettler Toledo ISM node tax. You connect directly to any Allen-Bradley, Siemens, Schneider Electric, Modicon, or Phoenix Contact PLC / HMI, or any SCADA stack, without vendor-specific cables, converters, or licence fees.
Open RS485 Modbus RTU vs Endress+Hauser, HACH & Mettler Toledo
The Tier 1 playbook is architectural lock-in. Once you specify a Memosens pH sensor, you’re committing to E+H Liquiline transmitters. Once you specify a HACH LDO DO probe, you’re tied to HACH SC200/SC4500 controllers. InstroDirect breaks that chain. Our sensors work with any Modbus RTU master — our own IDWQ-1000/2000/3000 transmitters, or any third-party PLC or gateway you already own.
Total cost of ownership comparison
- Calibration buffers: Commodity-priced pH 4 / 7 / 10 buffers vs E+H “Memobase Plus” consumables
- Engineering time: Modbus RTU maps are publicly documented. Memosens requires E+H-trained engineers.
Australian compliance & regulatory alignment
Our water-quality instrumentation is specified by customers working to AS/NZS 4020:2018 (products in contact with drinking water), the NHMRC Australian Drinking Water Guidelines, and state EPA reporting requirements (NSW EPA, QLD DES, VIC EPA, SA EPA, WA DWER). We supply the supplier datasheets, material declarations and Modbus register maps engineers need to commission and document these loops.
Who specifies InstroDirect?
Water utilities & WWTP operators
Online residual chlorine panels, free chlorine + ORP + pH in a single IDFCP-1 wall-mount unit, MLSS self-cleaning turbidity on secondary clarifiers, nitrate/nitrite analyzers for nutrient-removal plants. All Modbus RTU into existing Allen-Bradley CompactLogix or Siemens S7-1200 PLCs.
Food & beverage and dairy
Sanitary 3A tri-clamp conductivity and pH sensors for CIP verification. PEEK-bodied probes for aggressive cleaning chemistry. Fast-response glass electrodes for pasteurisation and fermentation. Full Modbus integration into FactoryTalk, WinCC, or Ignition.
Aquaculture & RAS
Fluorescence dissolved oxygen sensors with replaceable caps for long-term submerged deployment. POM-bodied pH probes for wastewater. All outputs to standard PLCs — no proprietary gateway required.
Mining, refineries & chemical processing
PEEK and HF-resistant electrodes for aggressive chemistry. High-pressure (13 bar) pH for Bayer-process and autoclave service. Cryogenic pH for refrigerated process lines.
Panel builders, system integrators & OEMs
Fixed Modbus RTU addressing, documented register maps, standard M12 and screw-terminal pinouts. Ship-on-panel-build pricing. No project-minimum quantities. Dedicated AU technical support for spec review and commissioning.
Technical specifications at a glance
Every product page carries a supplier-authoritative specification table covering: measuring range, accuracy, resolution, operating temperature, pressure rating, process connection, body material, cable length and options, output signal (analog mV, 4–20 mA, RS485 Modbus RTU), power requirements, ingress protection, and AU-specific considerations. If a spec isn’t shown, it’s because the supplier datasheet doesn’t explicitly publish it — tell us your loop conditions and we’ll get the specifics from the factory.
Delivery, commissioning and support
Delivery is typically 2–4 weeks from order confirmation. Freight via StarTrack / TNT / AusPost express to all Australian capitals and major regional centres. On-site commissioning and calibration available in QLD, NSW and VIC on request. Remote Modbus register-map walkthrough available nationally. 12-month Australian-backed warranty on every water-quality instrument.
Request a quote
Send us your loop specifications — process fluid, operating temperature and pressure, process connection, and PLC platform — and we’ll spec the right SKUs with AU-backed pricing and lead time. Contact our technical team or call 0403 082 383.
Showing all 33 resultsSorted by popularity
New
New
New
New
New
New
New
New
New
New
New
New
New
New
New
New
